Hints and tips
Using a docking station
For USB connector considerations related to the use of a docking
station
“Using the USB connector.”
Hot or warm docking to a docking station (Windows 95 and
Windows 98 only)
You might not be able to hot- or warm-dock your computer to the
SelectaDock docking station when certain PCI cards, PnP ISA
cards, and PC Cards are installed in the docking station. If such a
condition occurs, restart the system.
Using a PC Card with the docking station
In Windows 95 or Windows NT, you need to install the PC Card
support software
after docking your computer to the docking
station. If you have already installed the PC Card support
software, uninstall it and then reinstall it after you dock your
computer to the docking station.
Using the USB connector
If your computer tries to enter suspend mode and the request is
rejected, the device in the USB connector might be disabled. If this
occurs, do a hot-unplug-and-plug operation for the USB device.
For PCI Cards in the SelectaDock III docking station:
If
the setting of the USB connector on your computer is enabled (the
default setting), do not use a PCI Video Card and a PCI Network
Card at the same time in the SelectaDock III docking station. If
both cards are inserted, your system cannot boot.
For the USB connector setting on the SelectaDock III
docking station:
Do not disable the USB connector on the
SelectaDock III. If you disable it, the system might hang during a
hot- or warm-dock or -undock operation. If this occurs, restart the
system.
114
IBM ThinkPad 600X User's Reference
