manualshive.com logo in svg

IBM ThinkPad 560, User Manual

The IBM ThinkPad 560 Technical Reference Manual is available for free download on our website. This comprehensive manual provides detailed information and instructions on using and troubleshooting the ThinkPad 560. Download it now from manualshive.com to enhance your understanding and make the most out of your device.

Share
Download
background image

Troubleshooting

LCD Blank or Power-On Problems

Problem

Action

The screen is blank and
there are no beeps.

Note: If you are not sure
about the beeps, turn the
computer off; then turn it
on again, and listen for
the beeps.

Verify that:

The battery pack is correctly installed.

The AC Adapter is connected to the computer and the power cord is

plugged into a working electrical outlet.

The computer power switch is turned on.

If the preceding items are correct and the screen remains blank, have the
computer serviced.

The screen is blank and
there is one beep.

Note: If you are using an
external monitor, go to
“External Monitor
Problems” on page 157.

If a power-on password is set, press any key to display the power-on password
prompt and then type the correct password and press Enter (see page 78).

If a power-on password is not set, verify that the brightness control on the
computer is correctly adjusted. If the preceding items are correct and the
screen remains blank, have the computer serviced.

The screen is blank and
there is a continuous
beep, or two or more
beeps.

Have the computer serviced.

Only the cursor appears.

Reinstall your operating system and turn on the computer.

If there is still a problem, have the computer serviced.

xxxxx KB OK appears
and the computer halts.

Have the computer serviced.

The screen is unreadable
or distorted.

Verify that:

The ThinkPad display driver is installed correctly (refer to the Chapter 7 for

installation instructions).

The refresh rate settings in the ThinkPad Features program's display setup

screen (under the Advanced... button) are set to your display resolution and
color type.

Incorrect characters
appear on the screen.

Verify that operating systems and application programs have been installed and
configured correctly.

If so, have the computer serviced.

The screen stays on
although the power switch
is turned off.

Press the Power Shutdown switch on the bottom of the computer with the tip of
a pen or, disconnect the AC Adapter and remove the battery pack to turn off the
computer. Then turn the computer on again.

152

IBM ThinkPad 560 User's Guide 

 

Summary of Contents for ThinkPad 560








































































































































































































































































Reviews:

No comments

Related manuals for ThinkPad 560

Production Basics RTW 3000 Assembly Manual preview
RTW 3000
Brand: Production Basics Pages: 3
Vecow RCS-9000 User Manual preview
RCS-9000
Brand: Vecow Pages: 172
Zotac GAMING MEK1 User Manual preview
GAMING MEK1
Brand: Zotac Pages: 17
Steinberg HALion Sonic 2 Operation Manual preview
HALion Sonic 2
Brand: Steinberg Pages: 820
Avid Technology Dell T7600 Configuration Manuallines preview
Dell T7600
Brand: Avid Technology Pages: 23
Sun Microsystems Sun-1 Reference Manual preview
Sun-1
Brand: Sun Microsystems Pages: 92
MSI 482 User Manual preview
482
Brand: MSI Pages: 100
Dell Inspiron 7500 System Reference Manual preview
Inspiron 7500
Brand: Dell Pages: 165
Keri Systems i2 Box User Manual preview
i2 Box
Brand: Keri Systems Pages: 9
BPC 8590 User Manual preview
8590
Brand: BPC Pages: 81
Thermaltake Core V21 User Manual preview
Core V21
Brand: Thermaltake Pages: 12
Thermaltake Armor A90 User Manual preview
Armor A90
Brand: Thermaltake Pages: 14
PepperTech Digital B+ Setup And Quick Start Manual preview
B+
Brand: PepperTech Digital Pages: 6
Bang & Olufsen BeoSound 4 2851 Service Manual preview
BeoSound 4 2851
Brand: Bang & Olufsen Pages: 70
DAP Technologies V1214 User Manual preview
V1214
Brand: DAP Technologies Pages: 12
DAP Technologies MICROFLEX CE8000 User Manual preview
MICROFLEX CE8000
Brand: DAP Technologies Pages: 62
Shuttle SW580R8 Series User Manual preview
SW580R8 Series
Brand: Shuttle Pages: 28
Atiosys EMB-762 Specification Sheet preview
EMB-762
Brand: Atiosys Pages: 1

Brands by name

Popular brands

Load more brands