IBM ThinkPad 560, User Manual

Page: 140 / 263

Installing Windows 3.11
Note:
After installing Windows, you should
check the creation date of the
following drivers in the DOS
subdirectory and the Windows
subdirectory:
EMM386.EXE (loaded by
CONFIG.SYS)
HIMEM.SYS (loaded by
CONFIG.SYS)
SMARTDRV.EXE (loaded by
AUTOEXEC.BAT)
Then use the newest program
between the one for DOS and the
one for Windows for each drivers.
You can easily use the newer one by
changing the subdirectory name in
the CONFIG.SYS or
AUTOEXEC.BAT as follows:
C:\DOS\SMARTDRV.EXE
↓
C:\WINDOWS\SMARTDRV.EXE
3
When you have completed the installation of Windows,
edit the AUTOEXEC.BAT file so that the computer will
use the correct mouse driver.
When Windows Version 3.11 is installed, the computer is
automatically configured to use the MOUSE.COM driver
provided by Windows Version 3.11. However, for correct
operation, your computer must use the MOUSE.COM driver
that came with DOS.
a) At the DOS command prompt (usually C:\>), type
E \AUTOEXEC.BAT
and press Enter.
b) Find the line:
C:\WINDOWS\MOUSE.COM /Y
c) Change it to:
C:\DOS\MOUSE.COM /Y
d) Find the line that includes
SHARE.EXE
and delete that line.
e) Save the file and restart the computer.
Note:
You can change the display
resolution type by using the
ThinkPad Features program after
completing the installation of the
ThinkPad Features program for
Windows.
4
Select your display resolution type:
a) Start DOS and go to the WINDOWS subdirectory.
b) Type
SETUP
to start Windows setup program.
c) Using the Up Arrow (
↑
), highlight Display and press
Enter.
d) Select Other (Requires disk...) from the list.
e) Insert the Video Features Diskette for Windows 3.1 into
the diskette drive; then type
A:
and press Enter.
f) Select your desired resolution from the menu and press
Enter.
Verify that Display has changed to your desired resolution
type (an example is shown in the following screen). If the
item has not changed, return to step 4c.
122
IBM ThinkPad 560 User's Guide