Installing and Removing PC Cards
Note:
If you are using a PC Card with a
XJACK
**
connector, insert it into the
upper slot.
3
Insert the PC Card into an appropriate slot according to
your PC Card type.
If you are using a Type I or Type II PC Card, insert it into
either the upper slot
2
or the lower slot
3
.
If you are using a Type III PC Card, insert the card into the
lower slot
3
.
2
3
4
Press the PC Card firmly into the connector until the
eject button
4
pops out. Then, pull the eject button out
slightly and fold it to the left.
1
2
4
You have completed the installation of the PC Card. Refer to the
following sections:
To use PC Cards, see “Using PC Cards” on page 47.
To use PC Cards with power-saving functions, see:
– “Considerations for Suspend Mode” on page 71.
– “Considerations for Hibernation Mode” on page 75.
Chapter 6. Installing and Removing Options
91
Summary of Contents for ThinkPad 560
