Avoiding Hardware Conflicts
Starting the Computer from an ATA PC Card
To start the computer from an ATA PC Card:
1
Using the PS2 command or ThinkPad Features program,
check that there is no conflict between the system
resources used by the PC Card and by other devices.
The following are the resources for an ATA PC Card:
IRQ
15
I/O Address (HEX)
0170–0177
2
Start Easy-Setup and select the Start Up icon.
3
Select the PCMCIA icon.
The PC Card (PCMCIA icon) should not be set to follow the
computer hard disk drive (HDD-1 icon) in the list. If the HDD-1
icon is already in the drive-startup sequence, click on the
Reset icon; then set the sequence so that the PC Card icon is
before the HDD-1 icon.
4
Click on OK or press Enter; then restart the computer.
Appendix A. Avoiding Hardware Conflicts
187
Summary of Contents for ThinkPad 560
