IBM Tape Library Magstar 3494, Operator'S Manual

Page: 353 / 378

Table 44. Import Status Messages (continued)
Message Code Message Text
I0013 IMPORT PROCESSING RESUMED, SCRATCH VOLUME MADE AVAILABLE
This message is generated when, after the import operation was suspended because no scratch
stacked volumes were available, scratch stacked volumes are again available and the import
operation can continue.
Action: None, status only.
I0014 IMPORT PROCESSING TERMINATED, WAITING FOR SCRATCH VOLUME
This message is generated when the VTS has terminated the import operation because scratch
stacked volumes were not made available to the VTS within 60 minutes of the VTS need for a
scratch volume on which to copy imported logical volumes.
Action: Operator should make more VTS stacked volumes available, perform analysis of the
Status File on the Export List volume, and reissue the Import operation.
I0015 IMPORT RECOVERY STARTED
The Import operation has been interrupted by a VTS error or a power off condition for which
recovery is being attempted.
Action: None, status only.
I0016 IMPORT RECOVERY COMPLETED
The recovery attempt for interruption of an Import operation has been completed.
Action: Perform analysis of the Status File on the Export List volume and reissue the Import
operation, if necessary.
Export/Import List Volumes Failure-Reason Text
If the VTS subsystem was unable to process the Export or Import list volume, the
host generates message CBR3858I. The reason the list volume could not be
processed is included as a text string. The following table defines the
failure-reasons returned, the probable cause and the recommended actions for the
customer to take.
In the table below, the symbols <VOLSER>, <File>, <Record>, and <Field> will be
replaced in the message text as appropriate to describe the location of the error
found:
v
<VOLSER>, the logical Volser which was provided in the Export or Import
operation.
v
<File>, Export List File, Import List File, Reserved File or Status File.
v
<Record>, within a HDR1, HDR2, EOF1 EOF2, Identifier or Record.
v
<Field>, within a Label Identifier, Block Count, Record Length, Block Count, Title
Text or Version.
Table 45. Export-Import List Volumes Failure Reason Text
Failure-Reason Text — Probable cause. Recommended Action
Volume <VOLSER> has not been written
The Export or Import operation specified a Export/Import
List Volume which has not been created (written).
Operator should check for the correct identity of the
Import/Export List Volume and, if necessary, execute the
JCL which prepares a logical volume as the Import/Export
List Volume.
Appendix B. Virtual Tape Server Import/Export Advanced Function
331
|
||
||
|
|
|
|
||
|
|
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
||
|
|
|
|
|
|
|