IBM Tape Library Magstar 3494, Operator'S Manual, Page: 278 / 378

3. Click on the Enable password check box ( Figure 166).
4. Type the current password. (The default password is lmpsword .)
5. Type the new password. The following are the password guidelines:
v
One to eight characters
v
Uppercase or lowercase letters A–Z
v
Digits 0–9
v
Embedded blanks (blanks after the last character are ignored)
6. Type the new password again after Verify new password.
7. Click on the Change push button. A message confirming the password change
appears.
Note: Give the password to the remote library manager console operator.
Figure 165. Session Pull-down Menu
Figure 166. DCAF Password
256
Magstar 3494 Tape Library Operator Guide