IBM Tape Library Magstar 3494, Operator'S Manual

Page: 266 / 378

6. Type in the target password (the default is lmpsword ) to start the session.
As you type the password, the cursor moves and an asterisk (*) is displayed in
place of the character. The following are password guidelines:
v
One to eight characters
v
Uppercase or lowercase letters A–Z
v
Digits 0–9
v
Embedded blanks (blanks after the last character are ignored)
7. Press the OK push button or click on OK with the left pointing device button.
When the remote library manager console Distributed Console Access Facility is
starting, it displays its status (Figure 156).
The advanced program-to-program communications (APPC) or TCPIP indicating
Started appears momentarily on the library manager display (Figure 157 on
page 245).
Figure 155. DCAF Target Password
Figure 156. Initiating the Remote Library Manager Console
244
Magstar 3494 Tape Library Operator Guide