IBM System Storage TS7600 ProtecTIER Series, Installation Roadmap Manual

Page: 197 / 232

20. Close the ASM window.
The RSA IP address on Server B is now unique.
21. On the TSSC or service laptop, open a browser window.
22. In the Address Bar area of the browser window, type the unique RSA IP
address that you set in step 15 on page 158 and then press <enter>.
23. In the Login window, enter USERID as the username and PASSW0RD (with a
zero) as the password, and then click OK.
Note: The username and password are case sensitive and must be entered in
all uppercase.
The Integrated Management Welcome window opens.
24.
In the Integrated Management Welcome window:
a. Use the Inactive session timeout value dropdown list to specify a
reasonable amount of time which will keep your session active until you
can complete your task. (Ten minutes should suffice.)
Do not select the No Timeout setting, as this will prevent anyone else
from logging into the RSA until you have logged out.
b. Click Continue.
See Figure 51 on page 158.
Appendix D. Making a server connection through the System Management Module (IMM)
159