IBM System Storage TS7600 ProtecTIER Series Installation Roadmap Manual Download Page 130 | Manualshive

Page: 130 / 232

background image

5.

Leave the Attached Systems screen displayed, and go to “Testing Call Home”
on page 93.

Installing ProtecTIER Manager on the TSSC

About this task

Use the following procedure to install the ProtecTIER Manager GUI on the TSSC.

Procedure

1.

If the TSSC is not already powered-on, do so now.

2.

If prompted for login information, enter the username: service and the
password: service.
The TSSC's blue desktop displays.

3.

Right-click on the TSSC's blue desktop.
The IBM TS3000 System Console menu displays.

4.

Select Browser Functions

→

ProtecTIER Manager Functions

→

Install

ProtecTIER Manager GUI

.

The TSSC's CD-ROM drive opens.

Important:

If an older version of ProtecTIER Manager is already installed on

the TSSC, make sure the ProtecTIER Manager GUI is closed before installing
the newer version.

5.

Insert the IBM System Storage ProtecTIER Manager V2.5 DVD.
The following message displays:

Installation may last a few moments. Please be patient.

6.

When the ProtecTIER Manager installation wizard starts, follow the on-screen
instructions to complete the installation.
For detailed information about using the ProtecTIER Manager wizard, refer to
steps 2 on page 114 through 8 on page 115 in “Installing on a Windows-based
workstation” on page 113.
When the installation is complete and ProtecTIER Manager has been
successfully installed, the Install Complete window opens.

7.

Click Done.
The ProtecTIER Manager Installation wizard closes and the TSSC's CD-ROM
drive opens.

8.

Remove the IBM System Storage ProtecTIER Manager V2.5 DVD, close CD-ROM
drive, then go to Chapter 11, “Using ProtecTIER Manager,” on page 119.

Calibrating the server battery

Each server contains a battery that must be calibrated.

About this task

The battery in each server must be calibrated before the system can be turned over
to the customer.

Procedure

1.

From the command line of the server, enter the following command:
/opt/MegaRAID/MegaCli/MegaCli64 -AdpBbuCmd -BbuLearn -a0

<enter>

92

IBM System Storage TS7600 with ProtecTIER: Installation Roadmap Guide

«
...
128
129
130
131
132
...
»

Summary of Contents for System Storage TS7600 ProtecTIER Series









































































































































































































































Reviews:

No comments

Related manuals for System Storage TS7600 ProtecTIER Series

SentryPlus Alert

Brand: Watts Pages: 12

NIOT-E-TPI51-EN-RE

Brand: hilscher Pages: 258

Brand: THOMSON Pages: 110

ASLINK B2G78-PB1

Brand: Anywire Pages: 50

Brand: Ubee Pages: 7

Brand: Grandstream Networks Pages: 2

Brand: Teltonika Pages: 6

Brand: ViewSonic Pages: 53

Brand: Arris Pages: 228

Brand: Nateks Pages: 39

Brand: ENDIAN Pages: 2

Brand: SmartRG Pages: 65

Brand: SmartRG Pages: 113

Brand: Vaid Pages: 40

Brand: Avaya Pages: 22

Brand: Metz Connect Pages: 29

Brand: AAS Pages: 16

Brand: RADVision Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands