IBM System Storage TS7600 ProtecTIER Series, Installation Roadmap Manual

Page: 67 / 232

Table 7. Clustered gateway installation checklist (continued)
U
Task Description Where to find information
Section 4: Power-up all components
Note:
Tasks 4-4 and 4-5 can be performed in parallel.
h
4–1 Turn on the breaker(s) to power the PDUs. N/A
h
4–2 Power-up the disk expansion modules. “Disk expansion modules” on page 70.
h
4–3 Power-up the disk controllers. “Disk controllers” on page 70.
h
4–4 Power-up Server A. “Servers” on page 70.
h
4–5
Power-up Server B. “Servers” on page 70.
h
4–6
Power-up the TSSC, display panel, and TSSC
Ethernet switch. “TSSC and KVM kit” on page 71.
Section 5: Perform post-installation validation checks
h
5–1 Check power indicators for all components. “Visually inspecting indicator and fault LEDs”
on page 71.
h
5–2 Validate Ethernet link-up indicators on TSSC. “Visually inspecting indicator and fault LEDs”
on page 71.
h
5–3 Validate Ethernet link-up indicators on the
customer network to the server and the TSSC. “Visually inspecting indicator and fault LEDs”
on page 71.
h
5–4 Validate that all links on the internal Ethernet
network indicate 1000 Mbps, except for the
Ethernet connection to the WTI network power
switch, which indicates 100 Mbps.
All connections, except the connection to the
WTI network power switch, must be at 1000
Mbps for the cluster configuration to work.
“Visually inspecting indicator and fault LEDs”
on page 71.
h
5–5 Validate fibre channel link-up indicators from
the disk controller to the server. “Visually inspecting indicator and fault LEDs”
on page 71.
h
5–6a For VTL, validate fibre channel link-up
indicators from customer host to the server. “Visually inspecting indicator and fault LEDs”
on page 71.
h
5–6b For OST, validate Ethernet link-up indicators
from customer host to the server. “Visually inspecting indicator and fault LEDs”
on page 71.
Section 6: Prepare the TSSC for use with the TS7650G
h
6–1 Configure the TSSC's communication settings. “Setting up the TSSC for use with the
TS7650G” on page 77.
Section 7: Perform RAS package configuration and verification
h
7–1 Configure the RAS package on the server. Chapter 6, “Configuring the RAS package,” on
page 83.
h
7–3 Perform RAS verification. Includes verifying
attached systems and testing Call Home. Chapter 7, “RAS verification,” on page 91.
Section 8: SSR releases the system to trained ProtecTIER specialist or LBS representative
h
8–1
Configure ProtecTIER, including configuring
OST if applicable, and create the file system. Chapter 8, “Configuring ProtecTIER using
ptconfig,” on page 95.
h
8–2 Install the ProtecTIER Replication Manager
application, if applicable. Chapter 9, “Enabling the ProtecTIER
Replication Manager,” on page 111.
h
8–3 Install ProtecTIER Manager and create the
repository. Chapter 10, “Installing ProtecTIER Manager,”
on page 113.
h
8–4 Test the clustered system. Chapter 14, “Testing a clustered system,” on
page 139.
Chapter 4. Installing the TS7650G hardware
29
|||
| |
|
|||
| |
|
|||
| |
|
||||
|