IBM Redbooks ServeRAID-MR10i, User Manual

Page: 8 / 86

viii Preface
CAUTION:
The battery is a nickel metal hydride battery. To avoid possible
explosion, do not burn. Exchange only with the IBM-approved part.
Recycle or discard the battery as instructed by local regulations. In
the United States, IBM has a process for the collection of this
battery. For information, call 1-800-426-4333. Have the IBM part
number for the battery unit available when you call. (C007)
Protecting against Electrostatic Discharge – Static electricity can
harm delicate components inside your computer. To prevent static
damage, discharge static electricity from your body before you touch any
of your computer’s electronic components, such as the microprocessor.
You can do so by touching an unpainted metal surface, such as the
metal around the card-slot openings at the back of the computer.
As you continue to work inside the computer, periodically touch an
unpainted metal surface to remove any static charge your body may
have accumulated. In addition to the preceding precautions, you can also
take the following steps to prevent damage from electrostatic discharge:
•
When unpacking a static-sensitive component from its shipping
carton, do not remove the component from the antistatic packing
material until you are ready to install the component in your
computer. Just before unwrapping the antistatic packaging, be sure
to discharge static electricity from your body.
•
When transporting a sensitive component, first place it in an
antistatic container or packaging.
•
Handle all sensitive components in a static-safe area. If possible, use
antistatic floor pads and workbench pads.