IBM Redbooks ServeRAID-MR10i, User Manual

Page: 4 / 86

iv Preface
•
Chapter 1, Overview , provides a general overview of the
ServeRAID-MR10i controller.
•
Chapter 2, ServeRAID-MR10i SAS/SATA Controller
Hardware Installation , describes the procedures for installing the
ServeRAID-MR10i controller.
•
Chapter 3, ServeRAID-MR10i SAS/SATA Controller
Characteristics , provides the characteristics and technical
specifications for the ServeRAID-MR10i controller.
•
Chapter 4, Introduction to the Intelligent Backup Battery Unit ,
describes the iBBU model and explains how it operates.
•
Chapter 5, Installing the Intelligent Battery Backup Unit , explains
how to install the iBBU model.
•
Chapter 6, Using the Intelligent Battery Backup Unit , explains
how to use and monitor the iBBU model and how to replace it.
•
Chapter 7, Intelligent Battery Backup Unit Specifications , has
complete technical information and specifications for the iBBU
model.
•
Appendix A, Notices , contains information about the warranty,
patents, license inquiries, and trademarks.
•
Appendix B, Glossary of Terms and Abbreviations , lists and
explains the terms and abbreviations used in this manual.
Related Publications
ServeRAID-MR Device Driver Installation User’s Guide
IBM Document Numb er: 46M1382
This document explains how to install the ServeRAID device driver for
your operating system. The information in this document is independent
of the back-end bus and applies to the ServeRAID-MR10i controller.
ServeRAID-MR Software User’s Guide
IBM Document Numb er: 46M1381
This document explains how to use the MegaRAID Storage Manager,
WebBIOS Configuration Utility, and Command Line Interface (CLI)