IBM Netfinity 1000, Installation Instructions Manual

Page: 23 / 44

.4/
Retaining clips
.5/
Memory connector 1 (J1)
.6/
Memory connector 2 (J2)
.7/
Memory connector 3 (J3)
.8/
Memory connector 4 (J4)
.9/
Memory connector 5 (J5)
.1ð/
Memory connector 6 (J6)
.11/
Memory connector 7 (J7)
.12/
Memory connector 8 (J8)
.13/
DIMM
Complete this procedure to install memory-module kits.
1. Remove the memory board:
a. Remove the thumbscrew
.1/
from the side of the processor housing.
b. Lift up on the memory board handle
.3/
and remove the memory board
.2/
from the server.
c. Place the memory board on a static-protective surface, such as the static-protective package in
which the option came.
2. Locate the memory-module connectors on the memory board. Determine the memory-module
connector into which you will install the memory module.
3. Touch the static-protective package containing the memory-module kit to any unpainted metal surface
on the server. Then, remove the memory module from the package.
Note: To avoid breaking the retaining clips or damaging the memory-module connectors, handle the
clips gently.
Upgrade installation
15