IBM Netfinity 1000, Installation Instructions Manual

Page: 27 / 44

6. Replace the processor housing guide:
a. Remove the screws that secure the processor housing guide and remove the guide.
b. Install the processor housing guide
.1/
that comes with this option and secure with screws
.2/
.
7. Replace the fan assembly and press on the fasteners to lock in place.
8. Replace the processor housing top cover and press on the fasteners to lock in place.
9. Align the shuttle with the guides and slide the shuttle partially into the server.
10. Reconnect the cables to the shuttle that you disconnected in step 15 on page 7.
11. Reconnect the power cables that you disconnected in step 3 on page 9.
12. Grasp the handles on the processor housing top cover and lift the housing.
13. Orient the processor housing with the cable connectors toward the front of the server.
Attention: When you install the processor housing in the server, be sure that it is aligned correctly
before seating in the shuttle. Incorrect seating might cause damage to server components.
14. Align the processor housing with the guides. Carefully lower the processor housing into the shuttle
until it is fully seated.
15. Install and tighten the four blue thumbscrews.
16. Install the half-card slot insulator between slot 5 and the processor housing.
Upgrade installation
19