6-5
Installing the Windows NT Image
Installing the Windows NT Image
As the boot procedure continues the Avid Setup and Product Recovery
CD-ROM is booted.
You are placed in an MS-DOS
®
screen and receive the following four
choices when installing the Windows NT image:
•
1 — Perform a full recovery of the complete disk.
•
2 — Perform a partial recovery of only the C partition.
•
3 — Perform a partial recovery of only the D partition.
•
4 — Exit from the process without doing any recovery.
Depending upon the recovery selected, you should take the following
into consideration:
•
You must reinstall the Avid software application after you perform
any recovery.
•
If you select 1, all data on the C and D partitions will be destroyed.
If you select 2, all data on the C partition will be destroyed.
If you select 3, all data on the D partition will be destroyed.
•
You should attempt to backup all data on drive D prior to using
partial recovery of only drive C in case something happens with
the drive itself (C and D are actually the same drive, just a
different partition).
c
You will be warned two times during the following procedure that
you are about to destroy data on all, or parts, of hard drive 0.
To perform a complete recovery (image the complete disk):
1. Press the arrow keys to highlight choice 1 (full recovery) and press
Enter.
You will be asked if you really want to continue, because this
destroys data on hard drive 0.
