IBM eServer 130 xSeries, User Reference Manual

Page: 34 / 156

20
IBM xSeries 130: User’s Reference
Changing the language of the operating system
You can change the language of the appliance server operating system using the
Multiple Language User Interface CD that is included with the xSeries 130 appliance
server. Using this CD you can change the base operating-system language to any
one of the following languages:
• English
• Chinese (Simplified)
• Chinese (Traditional)
• French
• German
• Italian
• Japanese
• Spanish
Note: The Multiple Language User Interface CD is provided by Microsoft and
changes the language of the base operating system only. Preinstalled
applications and documentation remain in English. Languages such as
Japanese or Chinese might prompt you to insert the
Windows 2000 Advanced
Server CD . If you are prompted to do this, insert the Supplementary CD
instead.
To change the language of the operating system, do the following:
1. Insert the Multiple Language User Interface CD into the CD-ROM drive of the
appliance server.
2. Start a terminal services session on your remote workstation, and log in to the
appliance server. Run setup.exe from the CD.
3. When the Multi-Language User Interface Install window opens, click Install MUI .
4. Read the notices and click OK . The contents of the CD are unencrypted and
decompressed to drive C. This takes a few minutes. The MultiLanguage File
Installation window opens.
5. Select the language that you want to install on the xSeries 130 appliance server.
At the bottom of the window, change the default language to correspond to the
language you select.
6. Click OK . After a few seconds, an Installation Complete message is displayed.
Click OK .
7. A MUISETUP window opens, stating that changes do not occur until you log off
and log back on. Click
OK . When you are prompted to delete the MUI files for the
xSeries 130 appliance server, click Yes .