IBM eServer 130 xSeries, User Reference Manual

Page: 114 / 156

100
IBM xSeries 130: User’s Reference
075 Microprocessor Failed VRM corresponding to Microprocessor in socket xyz
is defective
(where xyz identifies the microprocessor whose
VRM is causing the error message)
Replace the VRM.
If the problem remains,
call for service.
VRM corresponding to Microprocessor in socket ID
xyz is not installed
(where xyz identifies the microprocessor whose
VRM is causing the error message)
Install a VRM.
If the problem persists,
call for service.
175 System thermal Failed Fan # n
(where n is the number of the failing fan)
Replace the indicated
fan.
Temperature sensed on processor board is out of
range Call for service.
180 Status display Failed Any failure message Call for service.
201 System memory Failed DIMMs in location DIMM n
(where n is the number of the socket that contains
the failing DIMM)
1. Reseat the failing
DIMM.
2. If the problem
remains, replace
the DIMM.
If the problem
persists, call for
service.
Test setup error: Corrupt BIOS in ROM If your appliance server
does not have the latest
level BIOS installed,
update the BIOS to the
latest level.
If the problem persists,
call for service.
Test setup error: Corrupt DMI BIOS, information in
BIOS is not as expected
Table 15. Diagnostic error messages.
Code Function Result Text message Action