IBM Elastic Storage System 3200, Hardware Planning And Installation Manual

Page: 69 / 156

e) Secure the rear end of the left outer rail to the rack using the M5 shipping screw that comes with
the supplier rail kit.
Figure 24. Securing the rear end of the left outer rail
f) Remove the middle screw (as shown in the following figure) from the front end of the left outer rail
using a flat tip screwdriver.
Figure 25. Removal of the middle screw
g) Push and hold the release catch outward and insert the left front bracket mounting screws into the
left front rack post holes. Verify that the rail is level.
Before After
Release
Catch
Figure 26. Installation of the front bracket
h) Once the mounting screws are fully inserted into the rack post holes, release the catch to secure
the rail to the post.
i) Install the middle screw on the front end of the left outer rail as shown in the following figure.
Chapter 4. Installing 51