IBM BladeCenter JS20, Installation And User Manual

Page: 63 / 132

Checkpoint code Description Suggested action
D104 The model field has been found to be
blank.
1. Enter a valid machine model. The backspace and
delete keys can be used to edit the value entered.
2. If the problem remains, you might have a problem
with the system board. Contact a service support
representative for assistance.
D105 The machine type has been entered. Re-enter a valid machine type. The backspace and
delete keys can be used to edit the value entered.
D106 The universal unique identifier (UUID)
universal is blank; the new value has
been calculated and the field has
been updated.
This error indicates that you might have a problem with
the system board. Contact a service support
representative for assistance.
D5BB There is a startup delay with the
countdown for overriding or modifying
the startup behavior.
1. Perform the system checkout procedure. See
“System checkout” on page 48.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
E101 Create a run-time abstraction service
(RTAS) node.
1. Perform the system checkout procedure. See
“System checkout” on page 48.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
E102 Load and initialize the RTAS.
1. Perform the system checkout procedure. See
“System checkout” on page 48.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
E105 Transfer control to the operating
system (normal mode startup).
v Perform the system checkout procedure. See
“System checkout” on page 48.
v
See BladeCenter JS20 Type 8842 Hardware
Maintenance Manual and Troubleshooting Guide .
E10A Load the RTAS device tree.
1. Perform the system checkout procedure. See
“System checkout” on page 48.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
E10B Set the RTAS device properties.
1. Perform the system checkout procedure. See
“System checkout” on page 48.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
E130 Build the device tree.
1. Perform the system checkout procedure. See
“System checkout” on page 48.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
Chapter 7. Solving problems
51