IBM BladeCenter JS20, Maintenance And Troubleshooting Manual

Page: 150 / 218

Service
request
number
SRN
source Description FRU/action
A1D-21x G A non-critical error has been detected, a
service processor detected error with
time-of-day clock backup battery.
1. Check the BladeCenter management module
event log; if an error was recorded by the
system or if a checkpoint code is displayed on
the console, see Chapter 10,
“Symptom-to-FRU index,” on page 93.
2. If no entry is found, replace the system board.
A1D-23x G A non-critical error has been detected:
Loss of heart beat from Service
Processor.
1. Check the BladeCenter management module
event log; if an error was recorded by the
system or if a checkpoint code is displayed on
the console, see Chapter 10,
“Symptom-to-FRU index,” on page 93.
2. If no entry is found, replace the system board.
A1D-24x G A non-critical error has been detected, a
service processor detected a surveillance
time-out.
1. Check the BladeCenter management module
event log; if an error was recorded by the
system or if a checkpoint code is displayed on
the console, see Chapter 10,
“Symptom-to-FRU index,” on page 93.
2. If no entry is found, replace the system board.
A1D-29x G A non-critical error has been detected, a
service process error accessing power
control network.
1. Check the BladeCenter management module
event log; if an error was recorded by the
system or if a checkpoint code is displayed on
the console, see Chapter 10,
“Symptom-to-FRU index,” on page 93.
2. If no entry is found, replace the system board.
A1D-30x G A non-critical error has been detected:
Non-supported hardware.
1. Check the BladeCenter management module
event log; if an error was recorded by the
system or if a checkpoint code is displayed on
the console, see Chapter 10,
“Symptom-to-FRU index,” on page 93.
2. If no entry is found, replace the system board.
A1D-31x G A non-critical error has been detected:
Error detected while handling an
attention/interrupt from the system
hardware.
1. Check the BladeCenter management module
event log; if an error was recorded by the
system or if a checkpoint code is displayed on
the console, see Chapter 10,
“Symptom-to-FRU index,” on page 93.
2. If no entry is found, replace the system board.
A1D-34x G A non-critical error has been detected:
Wire Test Error.
1. Check the BladeCenter management module
event log; if an error was recorded by the
system or if a checkpoint code is displayed on
the console, see Chapter 10,
“Symptom-to-FRU index,” on page 93.
2. If no entry is found, replace the system board.
A1D-35x G A non-critical error has been detected:
Mainstore or Cache IPL Diagnostic Error.
1. Check the BladeCenter management module
event log; if an error was recorded by the
system or if a checkpoint code is displayed on
the console, see Chapter 10,
“Symptom-to-FRU index,” on page 93.
2. If no entry is found, replace the system board.
140
BladeCenter JS20 Type 8842: Hardware Maintenance Manual and Troubleshooting Guide