IBM BladeCenter JS20, Maintenance And Troubleshooting Manual, Page: 14 / 218

configuring the Nortel Networks Layer 2-7 GbE Switch Module for IBM
Eserver
BladeCenter and a description of the switch-module features.
v IBM BladeCenter 2-Port Fibre Channel Switch Module Installation Guide: This
document contains instructions for setting up, installing, and configuring the IBM
Eserver
BladeCenter 2-Port Fibre Channel Switch Module, and a description of
the switch module features.
v Technical Update for IBM BladeCenter Fiber Channel Switch Module version
1.00: This document contains updated information about the IBM
Eserver
BladeCenter 2-Port Fibre Channel Switch Module.
v
IBM
Eserver
BladeCenter and BladeCenter T Serial Over LAN Setup Guide :
This document contains instructions for establishing a Serial Over LAN (SOL)
connection, enabling the SOL feature, and configuring the blade server so that
you can run SOL sessions and use the BladeCenter management-module
command-line interface. This document also contains instructions for updating
and configuring BladeCenter components for SOL operation using the
management-module Web-based management and configuration program.
v
IBM
Eserver
BladeCenter Power Module Upgrade Guidelines Technical Update:
This document contains information that helps you determine the power
requirements for the blade server.
Additional documentation might be included on the IBM BladeCenter Documentation
CD.
The IBM BladeCenter Documentation CD
The IBM BladeCenter JS20 blade server Documentation CD contains
documentation for the blade server in Portable Document Format (PDF) and
includes the IBM Documentation Browser to help you find information quickly.
Hardware and software requirements
The IBM Documentation CD requires the following minimum hardware and
software:
v Microsoft
®
Windows NT
®
4.0 (with Service Pack 3 or later), Windows
®
2000, or
Red Hat
®
Linux
®
v
100 MHz microprocessor
v 32 MB of RAM
v
Adobe Acrobat Reader 3.0 (or later) or xpdf, which comes with Linux operating
systems
Note: Acrobat Reader software is included on the CD, and you can install it
when you run the Documentation Browser.
Using the Documentation Browser
Use the Documentation Browser to browse the contents of the CD, read brief
descriptions of the documents, and view documents using Adobe Acrobat Reader or
xpdf. The Documentation Browser automatically detects the regional settings in use
in the system and displays the documents in the language for that region (if
available). If a document is not available in the language for that region, the English
version is displayed.
Use one of the following procedures to start the Documentation Browser:
v
If Autostart is enabled, insert the CD into the CD drive. The Documentation
Browser starts automatically.
4
BladeCenter JS20 Type 8842: Hardware Maintenance Manual and Troubleshooting Guide