IBM BladeCenter JS20, Maintenance And Troubleshooting Manual, Page: 141 / 218

Service
request
number
SRN
source Description FRU/action
A11-50x G Recoverable errors on resource indicate
a trend toward an unrecoverable error.
However, the resource could not be
deconfigured and is still in use. The
system is operating with the potential for
an unrecoverable error.
1. If repair is not immediately available, reboot
and the resource will be deconfigured;
operations can continue in a degraded mode.
2. Check the BladeCenter management module
event log for an entry around this time. If no
entry is found, replace the system board.
A11-510 G Resource has been deconfigured and is
no longer in use due to a trend toward an
unrecoverable error.
1. Schedule maintenance; the system is
operating in a degraded mode.
2. Check the BladeCenter management module
event log for an entry around this time. If no
entry is found, replace the system board.
A11-540 G Recoverable errors on resource indicate
a trend toward an unrecoverable error.
However, the resource could not be
deconfigured and is still in use. The
system is operating with the potential for
an unrecoverable error.
1. If repair is not immediately available, reboot
and the resource will be deconfigured;
operations can continue in a degraded mode.
2. Check the BladeCenter management module
event log for an entry around this time. If no
entry is found, replace the system board.
A11-550 G Recoverable errors on resource indicate
a trend toward an unrecoverable error.
However, the resource could not be
deconfigured and is still in use. The
system is operating with the potential for
an unrecoverable error.
1. If repair is not immediately available, reboot
and the resource will be deconfigured;
operations can continue in a degraded mode.
2. Check the BladeCenter management module
event log for an entry around this time. If no
entry is found, replace the system board.
A12-00x G A non-critical error has been detected.
Error log analysis indicates an error
detected by the memory controller, but
the failure could not be isolated.
1. Check the BladeCenter management module
event log; if an error was recorded by the
system or if a checkpoint code is displayed on
the console, see Chapter 10,
“Symptom-to-FRU index,” on page 93.
2. If no entry is found, replace the system board.
A12-01x G A non-critical error has been detected, an
uncorrectable memory error.
1. Check the BladeCenter management module
event log; if an error was recorded by the
system or if a checkpoint code is displayed on
the console, see Chapter 10,
“Symptom-to-FRU index,” on page 93.
2. If no entry is found, replace the system board.
A12-02x G A non-critical error has been detected, an
ECC correctable error.
1. Check the BladeCenter management module
event log; if an error was recorded by the
system or if a checkpoint code is displayed on
the console, see Chapter 10,
“Symptom-to-FRU index,” on page 93.
2. If no entry is found, replace the system board.
A12-03x G A non-critical error has been detected, a
correctable error threshold exceeded.
1. Check the BladeCenter management module
event log; if an error was recorded by the
system or if a checkpoint code is displayed on
the console, see Chapter 10,
“Symptom-to-FRU index,” on page 93.
2. If no entry is found, replace the system board.
Chapter 10. Symptom-to-FRU index
131