IBM BladeCenter HT 8740, Problem Determination And Service Manual

Page: 85 / 158

Installing a high-speed I/O-module interposer tray
To install a high-speed I/O-module interposer or interposer tray, complete the
following steps.
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 31.
2. Make sure that the high-speed I/O-module interposer release handles are in the
open position.
3. Slide the interposer into the module bay until it stops.
4. Push the release handles to the closed position.
5. Install a high-speed I/O module or filler (see “Installing a high-speed I/O module”
on page 72).
Chapter 4. Removing and replacing BladeCenter HT components
67