IBM BladeCenter HT 8740, Problem Determination And Service Manual

Page: 69 / 158

Removing a media tray
To remove a media tray, complete the following steps.
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 31.
2. Remove the bezel, if it is installed, to access the media tray to be removed (see
“Removing a bezel collar” on page 41).
3. Pull the media tray release handle to the open position. The media tray moves
out of the bay approximately 0.6 cm (0.25 inch).
4. Slide the media tray out of the bay.
5. If you are instructed to return the media tray, follow all packaging instructions
and use any packaging materials for shipping that are supplied to you.
Note: If a CompactFlash module is installed in the media tray, remove it from
the old media tray and install it in the new media tray.
Chapter 4. Removing and replacing BladeCenter HT components
51