IBM AS/400, Hardware User Manual

Page: 32 / 104

AS/400 Prompt
AS/400
Parameter
Host Definition
Statement Host Parameter
Mode description
name MODD MODEENT LOGMODE
AS/400 mode description name specified on the AS/400
CRTMODD command (MODD parameter) must be
defined in the host logon mode table using the
LOGMODE parameter on the MODEENT macro
instruction. The mode name must also be included in
the CICS/VS terminal control table (DFHTCT)
MODENAM parameter.
Class-of-service
description name COSD MODEENT COS
AS/400 class-of-service description name specified on
the AS/400 Create Class-of-Service Description
(CRTCOSD) command (COSD parameter) and
CRTMODD command (COS parameter) must be
defined in the host logon mode table using the COS
parameter on the MODEENT macro instruction. The
class-of-service description must also be defined in the
VTAM class-of-service table.
For more information on AS/400 parameters, see Communications Configuration .
Examples: Connecting AS/400 to a host system
Configuration parameters must be coordinated when you connect an AS/400 system to a host system.
Example 1: AS/400 to host system over a nonswitched SDLC line.
This diagram shows the AS/400 values that need to match the VTAM values when you use a nonswitched
SDLC line.
26
Version 5