manualshive.com logo in svg

IBM Aptiva, Hardware Handbook

Share
Download
IBM Aptiva Hardware Handbook Download Page 95

Preparing to install adapter cards     

85

The following table can help you when installing adapter cards.

Table 10: Adapter card configurations

Adapter card or cards 
currently installed:

Adapter card you 
are installing:

Action:

None

Plug and Play

Do not change any settings.

Non–Plug and Play

Do not change any settings.

Plug and Play

Plug and Play

Do not change any settings.

Non–Plug and Play

Change settings in the Plug and Play Utility located in Custom Tools before 
installing the card.

Non–Plug and Play

Plug and Play

Change settings in the Plug and Play Utility located in Custom Tools before 
installing the card.

Non–Plug and Play

Do not change any settings.

Both Plug and Play and 
Non–Plug and Play

Plug and Play

Do not change any settings.

Non–Plug and Play

Change settings in the Plug and Play Setup Utility located in Custom Tools 
before installing the card.

Summary of Contents for Aptiva









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands