IBM Aptiva 2159, Hardware Maintenance Service

Page: 64 / 214

Table 2-1 (Page 3 of 25). POST and Diagnostics Index for
Symptoms, Messages, Error Codes, or Beeps
Symptoms, Messages, Error
Codes, or Beeps Action/FRU
CD-ROM drive does not load or
eject when the system is
powered on, the LED light is off,
and the eject button is pressed
and held. “Factory-Installed Drive Devices” on
page 2-47.
CD-ROM drive system connection/cable
CD-ROM drive
Access Station host card
Access Station client card
Access Station cable
Power supply
CD-ROM drive does not read
data files and no error codes or
messages are displayed.
Cannot read from Drive E.
Retry loading CD
message is
displayed with disc loaded in
CD-ROM drive.
Mwave/Sound adapter card
works properly.
“Diagnostics for Factory-Installed Drive
Devices Not Supported by the Diagnostics
CD” on page 2-50.
Check with a known good disc and correct
level of software.
CD-ROM drive
Access Station host card
Access Station client card
Access Station cable
CD-ROM drive does not play an
audio disc. Mwave/Sound
adapter card works properly.
CD-ROM drive reads data files. “Diagnostics for Factory-Installed Drive
Devices Not Supported by the Diagnostics
CD” on page 2-50.
Audio cable on CD-ROM drive is not
connected to sound adapter card. Check
the audio cable from the CD-ROM drive to
the client card in the Access Station and
the audio cable that is connected from the
system board to the host card. If music can
be heard through headphones plugged into
the sound adapter card jack, replace the
CD-ROM drive. Access Station host card
Access Station client card Access Station
cable
Clock Stopped.
Real-time clock has stopped
working. Battery
System Board
CMOS Clock Test Failed
Time and Date Settings for
CMOS and DOS do not Match. Battery
System Board
2-12
All manuals and user guides at all-guides.com