IBM 8841 - eServer xSeries 236, Option Installation Manual

Page: 55 / 74

Retainer spring
Microprocessor
Heat sink
Heat-sink locking
lever
d. Push the heat sink into position firmly; then, let it rest on the microprocessor.
e. Close the heat-sink locking lever to secure the heat sink to the
microprocessor.
8. Replace the air-baffle assembly and cover. Go to “Completing the installation”
on page 46.
Replacing the battery
The following notes describe information that you must consider when replacing the
battery:
v
When the battery voltage becomes low, the Battery Error LED on the system
board is lit and the battery should be replaced as quickly as possible.
v
IBM has designed this product with your safety in mind. The lithium battery must
be handled correctly to avoid possible danger. If you replace the battery, you
must adhere to the following instructions.
Note: In the U. S., call 1-800-IBM-4333 for information about battery disposal.
v If you replace the original lithium battery with a heavy-metal battery or a battery
with heavy-metal components, be aware of the following environmental
consideration. Batteries and accumulators that contain heavy metals must not be
disposed of with normal domestic waste. They will be taken back free of charge
by the manufacturer, distributor, or representative, to be recycled or disposed of
in a proper manner.
v
To order replacement batteries, call 1-800-426-7378 within the United States, and
1-800-465-7999 or 1-800-465-6666 within Canada. Outside the U.S. and
Canada, call your IBM reseller or IBM marketing representative.
Note: After you replace the battery, you must reconfigure the server and reset
the system date and time.
Chapter 2. Installing options
43