IBM 8669 - Eserver xSeries 342, Hardware Maintenance Manual

Page: 94 / 156

Beep/Symptom FRU/Action
2-2-2 (Keyboard controller failed)
1. System Board
2. Keyboard
2-2-3 (CMOS power failure and
checksum checks failed)
1. Battery
2. System Board
2-2-4 (CMOS configuration
information validation failed)
1. Battery
2. System Board
2-3-1 (Screen initialization failed)
1. System Board
2-3-2 (Screen memory failed)
1. System Board
2-3-3 (Screen retrace failed)
1. System Board
2-3-4 (Search for video ROM failed)
1. System Board
2-4-1 (Video failed; screen believed
operable)
1. System Board
3-1-1 (Timer tick interrupt failed)
1. System Board
3-1-2 (Interval timer channel 2 failed) 1.
System Board
3-1-3 (RAM test failed above
address OFFFFH))
1. DIMM
2. System Board
3-1-4 (Time-Of-Day clock failed)
1. Battery
2. System Board
3-2-1 (Serial port failed)
1. System Board
3-2-2 (Parallel port failed)
1. System Board
3-2-4 (Failure comparing CMOS
memory size against actual)
1. DIMM
2. Battery
3-3-1 (Memory size mismatch
occurred; see
″
Memory Settings
″
on
page 25)
1. DIMM
2. Battery
3-3-2 (Critical SMBUS error
occurred)
1. Disconnect the server power cord from outlet, wait 30 seconds and
retry.
2. System Board
3. DIMMs
4. DASD Backplane
5. Power Supply
6. Power Supply Backplane
7. 12C Cable
3-3-3 (No operational memory in
system)
1. Install or reseat the memory modules, then do a 3 boot reset. (See
“Using the Configuration/Setup Utility program” on page 23.)
2. DIMMs
3. Memory Board
4. System Board
4-4-4 (Optional system management
adapter not installed in slot 1 or not
functioning correctly)
1. Verify that adapter is installed in slot 1.
2. Adapter
3. System Board
84
Hardware Maintenance Manual: xSeries 342 Type 8669