IBM 8669 - Eserver xSeries 342, Hardware Maintenance Manual

Page: 105 / 156

Error Code/Symptom FRU/Action
303 (Keyboard controller error)
1. System Board
602 (Invalid diskette boot record)
1. Diskette
2. Diskette Drive
3. Cable
4. System Board
604 (Diskette drive error)
1. Run Configuration/Setup and Diagnostics
2. Diskette Drive
3. Drive Cable
4. System Board
605 (Unlock failure)
1. Diskette Drive
2. Drive Cable
3. System Board
662 (Diskette drive configuration error)
1. Run Configuration/Setup and Diagnostics
2. Diskette Drive
3. Drive Cable
4. System Board
762 (Coprocessor configuration error)
1. Run configuration setup
2. Battery
3. Processor
962 (Parallel port error)
1. Disconnect external cable on parallel port.
2. Run Configuration/Setup
3. System Board
11XX (System board serial port 1 or 2
error)
1. Disconnect external cable on serial port.
2. Run Configuration/Setup
3. System Board
0001200 (Machine check architecture
error)
1. Processor 1
2. Optional Processor 2
1301 (I
2
C cable to front panel not found)
1. Cable
2. Front Panel
3. Power Switch Assembly
4. System Board
1302 (I
2
C cable from system board to
power on and reset switches not found)
1. Cable
2. Power Switch Assembly
3. System Board
1303 (I
2
C cable from system board to
power backplane not found)
1. Cable
2. Power Backplane
3. System Board
1304 (I
2
C cable to diagnostic LED board
not found)
1. Power Switch Assembly
2. System Board
Symptom-to-FRU index
95