IBM 8669 - Eserver xSeries 342, Hardware Maintenance Manual

Page: 100 / 156

Error Code/Symptom FRU/Action
166-400-000 System Management: Failed
System management hardware on system
board failed) (ISMP Self Test Result failed
tests: x where x = Flash, RAM, or ROM.)
1. Re-flash or Update firmware for ISMP
2. System board
180-XXX-000 (Diagnostics LED failure)
1. Run Diagnostic LED test for the failing LED.
180-XXX-001 (Failed Front LED panel test)
1. Operator Information Panel
2. Power Switch Assembly
3. System Board
180-XXX-002 (Failed Diagnostics LED
Panel test)
1. System Board
180-361-003 (Failed Fan LED test)
1. Fan(s)
2. System Board
180-XXX-003 (Failed System Board LED
test)
1. System Board
180-XXX-005 (Failed SCSI Backplane LED
test)
1. SCSI Backplane
2. SCSI Backplane Cable
3. System Board
201-XXX-0NN (Failed Memory test, see
″
Memory Settings
″
on page 25)
1. DIMM Location slots 1-4 where NN = DIMM location.
Note:
NN=1=DIMM 1 =2=DIMM 2 =3=DIMM 3 =4=DIMM 4
2. System Board
201-XXX-999 (Multiple DIMM failure, see
error text)
1. See error text for failing DIMMs
2. System Board
202-XXX-001 (Failed System Cache test)
1. VRM 1
2. Microprocessor 1
202-XXX-002 (Failed System Cache test)
1. VRM 2
2. Microprocessor 2
206-XXX-000 (Failed Diskette Drive test)
1. Cable
2. Diskette Drive
3. System Board
215-XXX-000 (Failed IDE CD-ROM test)
1. CD-ROM Drive Cables
2. CD-ROM Drive
3. System Board
217-198-XXX (Could not establish drive
parameters)
1. Check cable and termination
2. SCSI Backplane
3. Fixed Disk
217-XXX-000 (Failed BIOS Fixed Disk test)
Note: If RAID is configured, the fixed disk
number refers to the RAID logical array
1. Fixed Disk 1
217-XXX-001 (Failed BIOS Fixed Disk test)
Note: If RAID is configured, the fixed disk
number refers to the RAID logical array
1. Fixed Disk 2
217-XXX-002 (Failed BIOS Fixed Disk test)
Note: If RAID is configured, the fixed disk
number refers to the RAID logical array
1. Fixed Disk 3
90
Hardware Maintenance Manual: xSeries 342 Type 8669