IBM 8669 - Eserver xSeries 342, Hardware Maintenance Manual

Page: 108 / 156

Error Code/Symptom FRU/Action
00180700, 00180800 (General PCI error)
1. System Board
2. PCI Card
01295085 (ECC checking hardware test
error)
1. System Board
2. Processor
01298001 (No update data for processor
1)
1. Ensure all processors are the same stepping level and cache
size.
2. Processor 1
01298002 (No update data for processor
2)
1. Ensure all processors are the same stepping level and cache
size.
2. Processor 2
01298101 (Bad update data for processor
1)
1. Ensure all processors are the same stepping level and cache
size.
2. Processor 1
01298102 (Bad update data for processor
2)
1. Ensure all processors are the same stepping level and cache
size.
2. Processor 2
I9990301 (Fixed disk sector error)
1. Hard Disk Drive
2. SCSI Backplane
3. Cable
4. System Board
I9990305 (Fixed disk sector error, no
operating system installed)
1. Install operating system to hard disk drive.
I9990650 (AC power has been restored)
1. Check cable
2. Check for interruption of power supply
3. Power Cable
Service processor error codes
When viewed from POST, service processor error codes will appear in hexadecimal
form (generally beginning with A2, A3, A4, A5, A6, A7, AD, AE or E1). However,
when viewed from the System Error Log, the messages will appear as text. To
determine a possible error condition for the service processor, refer to the System
Error Log (see “Log viewing from diagnostic programs” on page 13).
98
Hardware Maintenance Manual: xSeries 342 Type 8669