IBM 8265 Nways ATM Switch, Installation Manual

Page: 45 / 102

Installing the Memory Upgrade
To install the memory upgrade:
1. Remove the memory module from its packaging.
2. Locate the end of the module that has a small notch.
3. Position the module above the vacant socket on the CPSW module, making sure that the end with the
notch is facing to the rear of the module.
4. Gently insert the module into the socket at 45 degrees.
5. Push gently downwards on the module until it clips into place.
To remove a memory module, release the clips at either end of the module, then slide the module
upwards gently and lift out.
Chapter 5. Installing Modules
31