IBM 8265 Nways ATM Switch, Installation Manual

Page: 16 / 102

Installation Summary
Table 1 describes the installation steps and the order in which you perform them.
Table 1. Installation Steps
Step Description See
1 Unpack the 8265 and components. page 3
2 Check that you have all the required components. pages 3 to 6
3 Install the cable management tray in the rack if you plan to install the
8265 in a rack (optional). page 8
4 Install the 8265 chassis in a rack or on a table or shelf page 11 or 17
5 Install the power supplies (AC or DC). page 20 or 21
6 Install the power supply bay grille. page 26
7 Install the Control Point and Switch module(s). page 29
8 Install the Controller module(s). Optional when CPSW2 Control Point
and Switch modules used. page 33
9 Determine the number, types, and slot locations of media modules
you plan to install in the 8265 before installing your first module. page 36
10 Connect a configuration console to the Control Point and Switch
module. page 39
11 Check that you have installed all the required components. page 45
12 Power on the 8265. page 46
13 Verify that all components are operating correctly. page 47
2
IBM 8265: Installation Guide