IBM 8265 Nways ATM Switch, Installation Manual

Page: 41 / 102

Chapter 5. Installing Modules
This chapter describes the following:
Ÿ
How to install the 8265 Control Point and Switch module(s)
Ÿ
How to install the 8265 Controller module(s)
Ÿ
Guidelines for installing 8265 media modules
Ÿ
Guidelines for installing 8260 media modules.
Before You Start
Take the following precautions before unpacking any modules:
Ÿ
Do not remove components from their anti-static bags until you are ready to install the modules in the
8265. This avoids the possibility of having electrostatic discharge damage static-sensitive devices on
the components.
Ÿ
Always use a floor strap and grounded mat, or wear a grounded static discharge wrist strap whenever
you inspect or install a module. Alternatively, touch a grounded rack or another source of ground
before handling the module.
Ÿ
Verify that the module (and daughter cards if required) are correct by matching the part number listed
on the side of the shipping carton to the part number you ordered.

Copyright IBM Corp. 1994, 1998
27