IBM 7013 J Series, Operator'S Manual

Page: 192 / 297

8-6
Operator Guide
Step 9
(From Steps 6, 18, 20)
The following steps analyze a console display problem.
Find your type of console display in the following table; then, follow the instructions given in the
Action column.
Console Display Action
Display Device Go to the your display documentation for
problem determination.
tty terminal Go to the documentation for problem
determination for this type of terminal.
Step 10
(From Steps 5, 6, 12, 18)
The diagnostic control program loaded correctly.
Press the Enter key.
Is the FUNCTION SELECTION menu displayed?
NO Go to Step 11.
YES Go to Step 12.
Step 11
(From Steps 10, 20)
There is a problem with the keyboard.
Find the type of keyboard you are using in the following table; then follow the instructions given
in the Action column.
Keyboard Type Action
tty-terminal keyboard. This applies to all
attached terminals. Go to the documentation for problem
determination for this type terminal.
Step 12
(From Step 10)
1. If the terminal type has not been defined, you must use the Initialize Terminal option on
the FUNCTION SELECTION menu to initialize the operating system environment before
you can continue with the diagnostics. This is a separate and different operation than
selecting the console display.
2. Select Diagnostic Routines.