44
User Guide
Removing the hard disk drive
The hard disk drive must be removed before you remove the metal system board
cover.
To remove the hard disk drive, do the following:
1. Remove the rear computer cover. See “Removing the rear cover” on page 42.
2. To release the hard disk drive, use a flat-blade screwdriver or coin and pry up
on the latch as shown in the following illustration.
3. Rotate the hard disk drive outward, and disconnect the power cable and the
signal cable from the drive.
4. Detach the hard disk drive from the system board cover, and set it aside.
Summary of Contents for 6643
