ibaMS4xUCO
Manual
Issue 1.5
57
11
Appendix
11.1
Supported rotary encoders
Note
The ibaMS4xUCO module supports various rotary encoders. Three of the rotary switches
which are already implemented are described in the following by way of example.
The ibaMS4xUCO internal channel wirings refer to wirings (circuit diagrams) illustrated in
chapter 7.4.3. Depending on the rotary encoder type, some switch settings are prede-
fined. Signal paths, which are not active, are not illustrated / described. The circuit dia-
gram in chapter 7.4.3 gives an overview. This chapter describes only active signal paths.
Further supported encoder types are constantly updated on the DVD „iba Software &
Manuals“.
If you need further rotary encoders please contact the iba support.
Manufacturer
Rotary encoder
Sony
MD50-2N
MD50-4N
Hübner
FG4
FGH4
Hengstler
RI58-O-xAx-xxRx
11.1.1
Sony MD50-2N/-4N
11.1.1.1 Pin assignment
GND
N-
MF
N+
B-
A-
B+
A+
VCC
ALMCOM_A
unused
ALM+
unused
unused
B-
B+
A-
A+
D
out0
GND
DigOut
V
DigOut
V
DigOut
INAL+
ALMCOM_A
2,2k
Ω
Figure 40:
Pin assignment Sony MD50-2N/-4N
