Manual
ibaMS4xUCO
36
Issue 1.5
Figure 24: EPF editor
The EPF editor consists of 3 parts:
Encoder parameters
Here, you can enter the vendor name, a device name (encoder type) and a version num-
ber. The encoder parameter file name is a combination of these entries according to this
syntax:
VendorName_DeviceName_vx.yz.xml
In this area, you may also configure further settings in the following configuration steps.
Help
Explanations and notes regarding the configuration settings are displayed automatically
in this area. Depending on the cursor position the display changes accordingly.
Comments
The comments entered here will be saved with the file. Depending on the respective
setting, comments are available by default.
An existing encoder parameter file can be opended with the <Open> button. If you
change the file, it can only be saved with a new version number.
Figure 25: Warning note
