IBA ibaMS4xUCO, Manual

Page: 79 / 82

ibaMS4xUCO Manual
Issue 1.5
79
11.3.3.3 Digital signal properties (mode dependent)
– signal MF
The MF channel is only designed for a single ended (“SE”) connection.

Use_MF:
Channel enabled

EnablePullUp_MF:
Only for open collector connection, internal supply (V
cc
= 5 V) 1 kOhm pullup (only
A, B, N) connected

Only for open collector connection,
internal supply (V
cc
= 5 V) 250 Ohm pullup connected

InvertPolarity_MF:
Inverts signal polarity

EnableAnalogFilter_MF:
Enables the analog RC low-pass filter with 180 kHz

FilterMode_MF:
Enables debounce filter

0: Off (without filter)

1: Stretch rising edge

2: Stretch falling edge

3: Stretch both edges

4: Delay both edges

FilterTime_MF:
Debounce time of the enabled debounce filter, in
µs [1 µs … 65535 µs]
11.3.3.4 Digital signal properties (mode dependent)
– signal “Dig out”

SafeOutputValue_Dig:
Does not have any function; however, always
needs to be „false“ and has to be
commented in