IBA ibaMS4xUCO, Manual

Page: 78 / 82

Manual ibaMS4xUCO
78 Issue 1.5
11.3.3.2 Digital signal properties (mode dependent)
– Signal A,B,N

Use_A:
Channel enabled

SingleEnded_A:
Switching
„SE“ – „DIF“

EnableTermination_A:
Only for
„DIF“, 120 Ohm termination between A+ and A-

InvertPolarity_A:
Inverts signal polarity

EnableAnalogFilter_A:
Only for
„SE“, enables analog RC low pass filter with 180 kHz

FilterMode_A:
Enables debounce filter

0: Off (without filter)

1: Stretch rising edge

2: Stretch falling edge

3: Stretch both edges

4: Delay both edges

FilterTime_A:
Debounce time of the enabled debounce filter,
in µs [1 µs … 65535 µs]

SafeOutputValue_A:
Does not have any function; however, always needs to be
„false“and has to remain
commented in