IAI X-SEL-J*-1-CC0 series, Instructions Manual

Page: 8 / 64

CC-Link
1. Overview
CC-Link stands for Control & Communication Link, which is a field network system.
It is possible to construct the systems of X-SEL, RCS-C, and E-Con with wire saving by connecting each of
these controllers to this CC-Link.
The X-SEL controller has two types of remote device station and remote I/O station. Each of the
RCS-C and E-Con controllers is handled as a remote I/O station, which allows for communications
of I/O data.
* For further information on CC-Link, refer to the Instruction Manual for the master unit and the
programmable controller (PLC) to be mounted.
Use this Instruction Manual together with the Instruction Manual of each controller of X-SEL, RCS-C,
and E-Con.
CC-Link cannot be used for any method other than those described as possible in this Instruction
Manual.
(Remote I/O station) (Remote device station) (Remote I/O station) (Remote I/O station)
Remote I/O
Remote device
station
Remote I/O
Master
station
CPU unit
1