IAI X-SEL-J*-1-CC0 series, Instructions Manual

Page: 44 / 64

CC-Link
(2) Factory-configured parameters
A: X-SEL-K
□
-
□
-CC1-
□
B: X-SEL-K
□
-
□
-CC2-
□
C: X-SEL-K
□
-
□
-CC3-
□
Set value
No. Parameter name
Input
range
A B C Remarks
1 I/O port assignment type 0 – 20 0 0 0 0: Fixed assignment
1: Automatic assignment (Priority: slot 1
—
)
* The ports only in the continuous installation
range from slot 1 are assigned for safety.)
2 Standard I/O:
Input port start No. (I/O1)
-1 – 599 -1 -1 -1 0 + (multiples of 8) (Invalid for negative values)
3 Standard I/O:
Output port start No. (I/O1)
-1 – 599 -1 -1 -1 300 + (multiples of 8)
(Invalid for negative values)
4 Expansion I/O1 fixed assignment
time: Input port start No. (I/O2)
-1 – 599 -1 -1 032 0 + (multiples of 8) (Invalid for negative values)
(Slot next to the standard I/O)
5 Expansion I/O1 fixed assignment
time: Output port start No. (I/O2)
-1 – 599 -1 -1 332 300 + (multiples of 8)
(Invalid for negative values)
6 Expansion I/O2 fixed assignment
time: Input port start No. (I/O3)
-1 – 599 -1 016 016 0 + (multiples of 8) (Invalid for negative values)
7 Expansion I/O2 fixed assignment
time: Output port start No. (I/O3)
-1 – 599 -1 316 316 300 + (multiples of 8)
(Invalid for negative values)
8 Expansion I/O3 fixed assignment
time: Input port start No. (I/O4)
-1 – 599 0 0 0 0 + (multiples of 8) (Invalid for negative values)
9 Expansion I/O3 fixed assignment
time: Output port start No. (I/O4)
-1 – 599 300 300 300 300 + (multiples of 8)
(Invalid for negative values)
10 Standard I/O error monitoring
(I/O1)
0 – 5 0 0 0
11 Expansion I/O1 error monitoring
(I/O2)
0 – 5 0 0 2
12 Expansion I/O2 error monitoring
(I/O3)
0 – 5 0 2 2
13 Expansion I/O3 error monitoring
(I/O4)
0 – 5 2 2 2
0: Non-monitoring
1: Monitoring
2: Monitoring (Non-monitoring of 24V I/O power
related errors)
(Main application of Ver. 0.55 or later)
3: Monitoring (Monitoring of 24V I/O power
related errors only)
(Main application of Ver. 0.55 or later)
14 Network I/F card remote: Number
of ports used for input
0 – 256 0 0 0 Multiples of 16
15 Network I/F card remote: Number
of ports used for output
0 – 256 0 0 0 Multiples of 16
(I/O1) to (I/O4) indicate the slot numbers.
Note: When a standard I/O board is not used, it is not required to supply 24V DC to the IO 24V power connector. In this
case, set the parameter No. 10 to “0.”
37