IAI X-SEL-J*-1-CC0 series, Instructions Manual

Page: 56 / 64

CC-Link
(2) Rotary switches
The following can be carried out by rotary switches:
a. Setting of station number
b. Setting of communications speed
a. Setting of station number
In the CC-Link only with remote I/O stations, up to 64 units can be connected.
The station number is set in the 1 to 64 range by the two rotary switches.
SA
×
10: Sets the tens place.
SA
×
1: Sets the ones place.
Station number
Rotary switch selection
number
SA
×
10 SA
×
1
0 0 0
1 10 1
2 20 2
3 30 3
4 40 4
5 50 5
6 60 6
7
⎯
7
8
⎯
8
9
⎯
9
(Example) When setting the station number to 12:
Set the rotary switch SA
×
10 to 1.
Set the rotary switch SA
×
1 to 2.
Note: The CC-Link first I/O address in PLC is determined according to the master unit installation position and the number
of I/O occupied points of the unit installed prior to that.
The I/O addresses in PLC are assigned from the first I/O address above in order of station number.
For further information regarding setting of the station number and setting of the I/O address in the PLC, refer to the
Instruction Manuals for the master unit and PLC to be mounted.
49