IAI X-SEL-J*-1-CC0 series, Instructions Manual

Page: 19 / 64

CC-Link
(3) CC-Link connection with standard I/O ports
The following are settings in cases where 16 points each for input and output are used from the first
standard I/O ports of X-SEL and other I/O ports are not used.
X-SEL (J type)
Not used
(None for single axis and two axes)
Input port No. 000 – 015
Output port No. 300 – 315
y
X-SEL (K type)
Not used
Input port No. 000 – 015
Output port No. 300 – 315
(The above are cases where the installation conditions as shown in Fig. 3-1-1 and Fig. 3-1-2 in section 3.1.1
are applied.)
12