2
Table of Contents
Page #
2
Attention Notes
3
Pre-assembly Check List
4
QV American Series SHELF.
PLEASE NOTE:
Quick Value Accessories include assembly instructions in their own packaging
when packed by individually. Please look for these instructions while
unpacking.
ATTENTION NOTES:
IAC Industries takes great care in the packaging of its products; however damage can occur
during shipment. Check all packages and parts for any signs of damage. If damage is
evident STOP and contact the carrier that delivered your order. Request a freight claim
inspector to document the damage and begin the freight claim process.
Tools required to assemble your QV American Series BENCH products are:
7/16” and 1/2” wrench or socket with ratchet.
Phillips screwdriver 8” long.
Utility knife.
Safety glasses and light duty protective gloves.
NOTE: Power tools are NOT recommended unless they are equipped with a torque limiting
device which can limit the torque to 10 foot lbs maximum at aluminum attachment points,
and 15 foot lbs maximum for all other attachment points.
Unpack your order and separate like parts into separate areas. Be careful not to damage
parts as they are being moved around and put into position. Also be sure all parts are
removed from the packing materials before these materials are thrown away.
Locate the hardware kits and keep them in a central area. If the assembly is going to take
more than one day, all individual hardware pieces should be returned to a central location.
Check all parts and hardware kits against the itemized packing list found with the assembly
instructions. If you believe there are parts missing from your order please contact IAC
Industries customer service HOTLINE at 800-989-1422.
If your order has ESD work surfaces or accessories please review page 5 for helpful
instructions and cautions before you begin assembling the workstations.
