2
Table of Contents
Page #
2
Attention Notes
3
Pre-assembly Check List
4
QV American Series Drawer Assembly (Steps 1-3)
5-6 Cylinder Lock Assembly Instructions
PLEASE NOTE:
Quick Ship Accessories include assembly instructions
in their own packaging when packed by individually.
Please look for these instructions while unpacking.
ATTENTION NOTES:
IAC Industries takes great care in the packaging of its products; however damage
can occur during shipment. Check all packages and parts for any signs of damage. If
damage is evident STOP and contact the carrier that delivered your order. Request a
freight claim inspector to document the damage and begin the freight claim process.
Tools required to assemble your QV American Series BENCH products are:
7/16” and 1/2” wrench or socket with ratchet.
Phillips screwdriver 8” long.
Utility knife.
Safety glasses and light duty protective gloves.
NOTE: Power tools are NOT recommended unless they are equipped with a torque
limiting device which can limit the torque to 10 foot lbs maximum at aluminum
attachment points, and 15 foot lbs maximum for all other attachment points.
Unpack your order and separate like parts into separate areas. Be careful not to
damage parts as they are being moved around and put into position. Also be sure all
parts are removed from the packing materials before these materials are thrown
away.
Locate the hardware kits and keep them in a central area. If the assembly is going to
take more than one day, all individual hardware pieces should be returned to a
central location.
