16
i3-TRNG-CAMS-
68R_78R
.indd
Rev.
150505
5. Slide the protruding mounting screws
through three matching mounting
screw holes on the camera body
and rotate the camera clockwise
to secure the camera body on the
mounting surface. Use a Phillips
screwdriver to tighten three
mounting screws in place.
Use
silicone
to maintain IP66
rating
DB78BB - Back box
Figure 25. Angle-Mount - Step 5.
6. Replace the camera cover.
Match up the safety lock screw with
the screw hole on the camera body,
then push straight down onto the
camera cover to engage the clips.
The camera cover will re-attach.
7. Use a Phillips screwdriver to
re-tighten the safety lock screw.
Use
silicone
to maintain IP66
rating
DB78BB - Back box
Figure 26. Angle-Mount - Step 7.
Use
silicone
to maintain IP66
rating
DB78BB - Back box
Figure 27. Angle-Mount - Step 8.
