Modify or add split times
To modify or add split times on an existing circuit:
-‐
Make sure the circuit map is correctly drawn. To do this, choose the “chronometer” menu,
then select “circuit detail” (after the circuit has been loaded), otherwise erase the map and
build it again by making a complete lap on the circuit (which means crossing two times the
finish line)
-‐
Hence, in the “circuit detail” menu, choose “add update split1” and select the “MAP” option,
then move the splits (move the split1 first, then move the split2) in the desired position
Exit the standby mode
If a standby time has been set, Chrome turns off the display and some peripherals (not the GPS) in
order to reduce power consumption and make the restart extremely fast; the system will
automatically turn off after the set standby time has elapsed. This time can be set in the “Options”
menu under "Standby Time".
If you want to turn off Chrome before the standby time has elapsed:
-‐
Turn off Chrome
-‐
Wait until the LED in the bottom-right corner flashes
-‐
Press the DN button until the red LED above the gears indicator turns on
-‐
Release the DN button
-‐
After some seconds the upper white LEDs will flash, this means that Chrome has been
turned off
